As it was mentioned previously in the announcement article, I moved my blog to Pelican - a static site generator. It has Python in its core and doesn't require a database or server-side logic to work. Pelican grabs content, merges it with the defined templates and outputs the result as HTML, CSS, JS, along with other static files (e.g. graphics or plain text files). All these files can then be uploaded to a server and literally, that's it! The only thing that you should have on your server is a web server, like Apache or Nginx.
You can write content in your favorite text editor or IDE using reStructuredText, Markdown or AsciiDoc - simple, easy to read and understand formats. The best thing I like here is a process - you write something, save it, check the generated article, update the text again, save, check. It makes writing a pleasure, as you can see your changes immediately, so you want to repeat the process again and again. Lovely magic.
OK, let's get to the point. By the end of this article, you will receive a fully functional Pelican website on top of GiLab Pages and will be able to apply changes by pushing a new commit.
NOTE: For this guide I use Ubuntu 17.04, but those of you who work on Windows shouldn't have any troubles as well, everything is quite similar. If you think you need some help, feel free to contact me or leave a comment below this article.
Before proceeding with Pelican and GitLab, you need to install the following basic packages:
- python. Pelican uses Python, so it should be installed first. As the Pelican documentation states, it runs best on Python 2.7.x and 3.3+, so you can choose the one that best suits your environment setup.
- pip. Python package manager. It will be used to install virtualenv, Pelican, and related packages.
- git. Version control system. It will be used to work with GitLab.
Use the command below to install these packages in bulk:
sudo apt install python3.6 python-pip git -y
In my case, all the required Python packages were available out-of-the-box, so I just installed git.
GitLab: Setup a Project
Create a new repository on GitLab. There are several considerations to keep in mind:
- If you create a project under your username (
<username>.gitlab.io), your website will be available under
- If you create a project under a group name (
<groupname>.gitlab.io), your website will be available under
Choose a name wisely, as the associated address will be used in several places later. I created a repository under my username called
virtualenv is a tool to create isolated Python environments. It is recommended to install Pelican in an isolated environment to avoid possible permission problems and version conflicts when multiple python projects (or packages) require different versions of the same libraries to work.
pip install virtualenv
Collecting virtualenv Downloading virtualenv-15.1.0-py2.py3-none-any.whl (1.8MB) 100% |████████████████████████████████| 1.8MB 280kB/s Installing collected packages: virtualenv Successfully installed virtualenv-15.1.0
Specify a path where you want to create a new environment for your website:
Running virtualenv with interpreter /usr/bin/python2 New python executable in /home/gold/env/bin/python2 Also creating executable in /home/gold/env/bin/python Installing setuptools, pkg_resources, pip, wheel...done.
Navigate to the folder and run the environment:
cd env/ source bin/activate
Your terminal should indicate that
env environment became active:
Clone the GitLab Project
Once the environment created and activated, clone the previously created GitLab project in it:
git clone firstname.lastname@example.org:<username>/mister-gold-test.git Cloning into 'mister-gold-test'... warning: You appear to have cloned an empty repository. cd mister-gold-test
After you have cloned the project repository into the virtual environment, proceed with the installation of Pelican.
pip install pelican
Collecting pelican Downloading pelican-3.7.1-py2.py3-none-any.whl (134kB) 100% |████████████████████████████████| 143kB 1.2MB/s Collecting six>=1.4 (from pelican) Downloading six-1.11.0-py2.py3-none-any.whl Collecting unidecode (from pelican) Downloading Unidecode-0.04.21-py2.py3-none-any.whl (228kB) 100% |████████████████████████████████| 235kB 1.5MB/s Collecting pytz>=0a (from pelican) Downloading pytz-2017.2-py2.py3-none-any.whl (484kB) 100% |████████████████████████████████| 491kB 1.0MB/s Collecting docutils (from pelican) Downloading docutils-0.14-py2-none-any.whl (543kB) 100% |████████████████████████████████| 552kB 827kB/s Collecting blinker (from pelican) Downloading blinker-1.4.tar.gz (111kB) 100% |████████████████████████████████| 112kB 3.3MB/s Collecting pygments (from pelican) Downloading Pygments-2.2.0-py2.py3-none-any.whl (841kB) 100% |████████████████████████████████| 849kB 696kB/s Collecting python-dateutil (from pelican) Downloading python_dateutil-2.6.1-py2.py3-none-any.whl (194kB) 100% |████████████████████████████████| 194kB 2.2MB/s Collecting feedgenerator>=1.9 (from pelican) Downloading feedgenerator-1.9.tar.gz (4.1MB) 100% |████████████████████████████████| 4.1MB 183kB/s Collecting jinja2>=2.7 (from pelican) Downloading Jinja2-2.9.6-py2.py3-none-any.whl (340kB) 100% |████████████████████████████████| 348kB 2.2MB/s Collecting MarkupSafe>=0.23 (from jinja2>=2.7->pelican) Downloading MarkupSafe-1.0.tar.gz Building wheels for collected packages: blinker, feedgenerator, MarkupSafe Running setup.py bdist_wheel for blinker ... done Stored in directory: /home/gold/.cache/pip/wheels/7b/8a/eb/5a4f4444f366c515073db8a129c92d4727ad945e5e64b9e8bd Running setup.py bdist_wheel for feedgenerator ... done Stored in directory: /home/gold/.cache/pip/wheels/6a/7e/41/7ed20833c4cae3d36c5e373ac5d8d9eee58546b87c1b9505fe Running setup.py bdist_wheel for MarkupSafe ... done Stored in directory: /home/gold/.cache/pip/wheels/88/a7/30/e39a54a87bcbe25308fa3ca64e8ddc75d9b3e5afa21ee32d57 Successfully built blinker feedgenerator MarkupSafe Installing collected packages: six, unidecode, pytz, docutils, blinker, pygments, python-dateutil, feedgenerator, MarkupSafe, jinja2, pelican Successfully installed MarkupSafe-1.0 blinker-1.4 docutils-0.14 feedgenerator-1.9 jinja2-2.9.6 pelican-3.7.1 pygments-2.2.0 python-dateutil-2.6.1 pytz-2017.2 six-1.11.0 unidecode-0.4.21
In order to be able to write articles in Markdown, it is also necessary to install the appropriate package:
pip install markdown
Collecting markdown Downloading Markdown-2.6.9.tar.gz (271kB) 100% |████████████████████████████████| 276kB 920kB/s Building wheels for collected packages: markdown Running setup.py bdist_wheel for markdown ... done Stored in directory: /home/gold/.cache/pip/wheels/bf/46/10/c93e17ae86ae3b3a919c7b39dad3b5ccf09aeb066419e5c1e5 Successfully built markdown Installing collected packages: markdown Successfully installed markdown-2.6.9
Generate a Basic Website
Okay, Pelican has been installed and you can test it. Launch the
pelican-quickstart command to create a basic skeleton website:
This script asks you some questions about a website to be created and generates all the required files:
Welcome to pelican-quickstart v3.7.1. This script will help you create a new Pelican-based website. Please answer the following questions so this script can generate the files needed by Pelican. > Where do you want to create your new web site? [.] > What will be the title of this web site? Mister Gold Test > Who will be the author of this web site? Antonio > What will be the default language of this web site? [en] > Do you want to specify a URL prefix? e.g., http://example.com (Y/n) > What is your URL prefix? (see above example; no trailing slash) https://<username>.gitlab.io/mister-gold-test > Do you want to enable article pagination? (Y/n) > How many articles per page do you want?  > What is your time zone? [Europe/Paris] > Do you want to generate a Fabfile/Makefile to automate generation and publishing? (Y/n) > Do you want an auto-reload & simpleHTTP script to assist with theme and site development? (Y/n) > Do you want to upload your website using FTP? (y/N) > Do you want to upload your website using SSH? (y/N) > Do you want to upload your website using Dropbox? (y/N) > Do you want to upload your website using S3? (y/N) > Do you want to upload your website using Rackspace Cloud Files? (y/N) > Do you want to upload your website using GitHub Pages? (y/N) Done. Your new project is available at /home/gold/env/mister-gold-test
Pay attention to a URL prefix - this is an address to your website you got after creating your project in GitLab (That I recommended you to choose wisely). The rest of questions you can leave in their defaults. Default values are capitalized (Y/n or y/N).
Add an article
pelican-quickstart generates the base Pelican structure that allows you to extend it and customize according to your needs, but all articles should be added manually.
Open the folder
~/env/mister-gold-test/content in your file explorer and create a file called
article.md with the following contents:
Title: My first article Date: 2017-10-14 00:01 Modified: 2017-10-15 00:10 Category: python Tags: pelican, gitlab Slug: my-first-article Authors: Antonio Summary: Short version for index and feeds This is the content of my first article
markdown package was installed previously to support Markdown syntax and all the metadata that are set before the article body.
Generate HTML output
Before converting your article into HTML and see how the website looks like, apply the following trick to simplify further integration with GitLab.
Change the output folder
By default Pelican puts the generated files into
output folder and this won't work in GitLab because it requires static files to be located in
To change the output folder, navigate to the project folder (
publishconf.py files and then add the following line to these files:
OUTPUT_PATH = 'public/'
To do the same for local development, open the
Makefile file and change this
These two manipulations will force Pelican to put all the generated files to the
public folder. Now you can delete
output folder, you are no longer need it.
Once finished, you can convert your first article into HTML using either
pelican command, specifying the path to your content, or
pelican content Done: Processed 1 article, 0 drafts, 0 pages and 0 hidden pages in 0.21 seconds.
make html pelican /home/gold/env/mister-gold-test/content -o /home/gold/env/mister-gold-test/public -s /home/gold/env/mister-gold-test/pelicanconf.py Done: Processed 1 article, 0 drafts, 0 pages and 0 hidden pages in 0.23 seconds.
All the generated static files will be located in
public folder now.
View the generated files
To preview the generated files, use
make serve command:
make serve cd /home/gold/env/mister-gold-test/public && python -m pelican.server
You can also navigate to the
public folder and run a simple web server using Python. The command syntax depends on the version of Python you use:
For Python 2.7.x:
cd public python -m SimpleHTTPServer
For Python 3.x:
cd public python -m http.server
Once launched, open
http://localhost:8000 in your web browser:
Configuration for GitLab
To properly configure GitLab to work with Pelican, you need to create 3 files:
.gitignore, and enable Shared Runners.
Open your project folder (
~/env/mister-gold-test) and create a
requirements.txt file with the following contents:
This file contains a list of packages that should be installed when creating your website. These are the same commands that were executed inside the virtual environment.
.gitlab-ci.yml is a configuration file that will build and deploy your website to GitLab. Create a
.gitlab-ci.yml file (with the leading dot) and add the following contents to it:
image: python:3.6-alpine pages: script: - pip install -r requirements.txt - pelican -s publishconf.py artifacts: paths: - public/
This file contains definitions of how a project should be built:
- image - defines a Docker image that will be used during build time.
- pages - a special job that is used to upload static content to GitLab. It has two main requirements:
- any static content must be placed under a
publicdirectory (that's why you had to change default output folder in Pelican)
- artifacts with a path to the
publicdirectory must be defined (you can see these lines in
- any static content must be placed under a
- script - a shell script that is executed by the Runner
- artifacts - a job that specifies a list of files and directories which should be attached to the
pagesjob after successful completion.
In other words, once a new change is committed, it triggers CI Pipeline. GitLab checks
gitlab-ci.yml and launches Runner to perform all the steps defined in the file. A runner is basically a virtual machine that picks up a job via GitLab CI API. In our case, Runner will use docker image with python 3.6 version, install pelican, markdown and then convert the existing content to HTML using data from
publishconf.py configuration file. The resulting files (artifacts) will be placed in
public folder that is publicly available.
Since all the content will be processed on GitLab side, there is no need to save the
public folder in git. Also, Pelican creates some compiled files when building the website - these files should also be ignored. Open the project folder and create a
.gitignore file with the following lines:
To allow your project to trigger CI process, you need to enable Shared Runners. Open your GitLab Project, Settings > CI/CD > Pipelines. Expand the Runners settings section and make sure that Shared Runners are enabled.
Publish on GitLab
The final step is publishing your website. To do this, simply commit and push the project folder to the repository.
git add . git status On branch master Initial commit Changes to be committed: (use "git rm --cached <file>..." to unstage) new file: .gitignore new file: .gitlab-ci.yml new file: Makefile new file: content/article.md new file: develop_server.sh new file: fabfile.py new file: pelicanconf.py new file: publishconf.py new file: requirements.txt
But first, I advise you to check carefully the files that were modified in the working directory. Also notice that if you did everything right with
gitignore, you shouldn't see the
public folder and any compiled python files here - they are ignored by git.
Everything is good, let's commit it:
git commit -m "Initial project state" [master (root-commit) c81bdd9] Initial project state 9 files changed, 403 insertions(+) create mode 100644 .gitignore create mode 100644 .gitlab-ci.yml create mode 100644 Makefile create mode 100644 content/article.md create mode 100755 develop_server.sh create mode 100644 fabfile.py create mode 100644 pelicanconf.py create mode 100644 publishconf.py create mode 100644 requirements.txt
git push origin master Counting objects: 12, done. Delta compression using up to 2 threads. Compressing objects: 100% (9/9), done. Writing objects: 100% (12/12), 4.98 KiB | 0 bytes/s, done. Total 12 (delta 0), reused 0 (delta 0) To gitlab.com:<username>/mister-gold-test.git * [new branch] master -> master
After that you can check the status of the current build:
and the CI Pipeline Build log:
Running with gitlab-runner 10.1.0-rc.1 (946e835b) on docker-auto-scale (4e4528ca) Using Docker executor with image python:3.6-alpine ... Using docker image sha256:ae26e16b7a5e8895ff9ad2f72d3a505394d06b94012b6bd623a46d5268f43c92 for predefined container... Pulling docker image python:3.6-alpine ... Using docker image python:3.6-alpine ID=sha256:d26cf7d4701d0c82caabe7f58164a372c5cc1c3dde5ec9c29d1eaeb75075cc95 for build container... Running on runner-4e4528ca-project-4393246-concurrent-0 via runner-4e4528ca-srm-1508088671-157c532f... Cloning repository... Cloning into '/builds/<username>/mister-gold-test'... Checking out c81bdd9c as master... Skipping Git submodules setup $ pip install -r requirements.txt Collecting pelican (from -r requirements.txt (line 1)) Downloading pelican-3.7.1-py2.py3-none-any.whl (134kB) Collecting markdown (from -r requirements.txt (line 2)) Downloading Markdown-2.6.9.tar.gz (271kB) Collecting jinja2>=2.7 (from pelican->-r requirements.txt (line 1)) Downloading Jinja2-2.9.6-py2.py3-none-any.whl (340kB) Collecting docutils (from pelican->-r requirements.txt (line 1)) Downloading docutils-0.14-py3-none-any.whl (543kB) Collecting pygments (from pelican->-r requirements.txt (line 1)) Downloading Pygments-2.2.0-py2.py3-none-any.whl (841kB) Collecting python-dateutil (from pelican->-r requirements.txt (line 1)) Downloading python_dateutil-2.6.1-py2.py3-none-any.whl (194kB) Collecting unidecode (from pelican->-r requirements.txt (line 1)) Downloading Unidecode-0.04.21-py2.py3-none-any.whl (228kB) Collecting blinker (from pelican->-r requirements.txt (line 1)) Downloading blinker-1.4.tar.gz (111kB) Collecting feedgenerator>=1.9 (from pelican->-r requirements.txt (line 1)) Downloading feedgenerator-1.9.tar.gz (4.1MB) Collecting six>=1.4 (from pelican->-r requirements.txt (line 1)) Downloading six-1.11.0-py2.py3-none-any.whl Collecting pytz>=0a (from pelican->-r requirements.txt (line 1)) Downloading pytz-2017.2-py2.py3-none-any.whl (484kB) Collecting MarkupSafe>=0.23 (from jinja2>=2.7->pelican->-r requirements.txt (line 1)) Downloading MarkupSafe-1.0.tar.gz Building wheels for collected packages: markdown, blinker, feedgenerator, MarkupSafe Running setup.py bdist_wheel for markdown: started Running setup.py bdist_wheel for markdown: finished with status 'done' Stored in directory: /root/.cache/pip/wheels/bf/46/10/c93e17ae86ae3b3a919c7b39dad3b5ccf09aeb066419e5c1e5 Running setup.py bdist_wheel for blinker: started Running setup.py bdist_wheel for blinker: finished with status 'done' Stored in directory: /root/.cache/pip/wheels/7b/8a/eb/5a4f4444f366c515073db8a129c92d4727ad945e5e64b9e8bd Running setup.py bdist_wheel for feedgenerator: started Running setup.py bdist_wheel for feedgenerator: finished with status 'done' Stored in directory: /root/.cache/pip/wheels/6a/7e/41/7ed20833c4cae3d36c5e373ac5d8d9eee58546b87c1b9505fe Running setup.py bdist_wheel for MarkupSafe: started Running setup.py bdist_wheel for MarkupSafe: finished with status 'done' Stored in directory: /root/.cache/pip/wheels/88/a7/30/e39a54a87bcbe25308fa3ca64e8ddc75d9b3e5afa21ee32d57 Successfully built markdown blinker feedgenerator MarkupSafe Installing collected packages: MarkupSafe, jinja2, docutils, pygments, six, python-dateutil, unidecode, blinker, pytz, feedgenerator, pelican, markdown Successfully installed MarkupSafe-1.0 blinker-1.4 docutils-0.14 feedgenerator-1.9 jinja2-2.9.6 markdown-2.6.9 pelican-3.7.1 pygments-2.2.0 python-dateutil-2.6.1 pytz-2017.2 six-1.11.0 unidecode-0.4.21 $ pelican -s publishconf.py WARNING: Feeds generated without SITEURL set properly may not be valid Done: Processed 1 article, 0 drafts, 0 pages and 0 hidden pages in 0.28 seconds. Uploading artifacts... public: found 46 matching files Uploading artifacts to coordinator... ok id=36292241 responseStatus=201 Created token=tEvi_fb_ Job succeeded
You can see that GitLab CI logic is straightforward and it did the same operations that we performed after activating the virtual environment.
Once both jobs completed successfully, you can open
https://<username>.gitlab.io/mister-gold-test and check your website. You can also see this URL by navigating to GitLab Settings > Pages:
So, the moment of truth - accessing the website via a browser:
YEES! It works! You should now have a fully working Pelican website, being served by GitLab. This is, actually, the way how I created this blog, so it represents a live example of what you can achieve with Pelican and GitLab Pages. You may also consider the following steps:
In my case, all these steps are fulfilled :)
- Pelican Documentation
- GitLab Pages Documentation
- Hosting on GitLab.com with GitLab Pages
- Pelican on GitLab Pages
Hope you found this guide helpful!
That's it! See you in new articles!
Интересна ли для вас была статья? Осталось ли что-то неясным? Напишите в комментариях ниже.